JBL VTX Series, Manual

Page: 55 / 78

55
VTX A 12 | Rigging Manual
13.3 VTX A12 VT GND PARTS
Screw Jacks
- Two screw jacks are included with each VTX A12 VT GND outrigger. The screw jacks are used to lift the array
stack off the ground and ensure that no weight is resting on the VT wheels. The screw jacks are not used for adjusting the
array angle.
Angle Selection Mechanism
- The Angle Selection Mechanism is used for selecting the array angle. Options range from -15
to +5 degrees in two-degree steps.
VT Connection Points
- Two quick release pins, one for the front and one for the rear, are included on each skate for attaching
the VTX A12 VT GND to the VTX A12 VT. Refer to the product labels on the GND for the correct orientation.
Angle Selection QRPs - Two quick release pins for selecting and locking the VTX A12 VT GND angle.
1
2
3
4
1
2
3
4