52
VTX A
8
| Rigging Manual
12 - THE VTX A8 SUSPENSION BAR
The VTX A8 SB is a lightweight suspension bar that can be used as an array frame or to implement pull-back for VTX A8 or B18 arrays.
When used for pull-back, the VTX A8 SB can be attached to the bottom cabinet of an array and connected to a rear suspension point
to allow for extra down-tilt, otherwise not possible by using the VTX A8 AF alone. The SB can also attach to the top cabinet of an array
and be used as a compact array frame. Two VTX A8 Suspension Bars can be used: one at the top and one at the bottom of the array
for dual-point applications and added aiming flexibility. For more information on using the VTX A8 SB with the B18, refer to the B18
Rigging manual.
12.1 - SUSPENSION BAR OVERVIEW
CENTER SHACKLE
ATTACHMENT LOCATION
SHACKLE POSITION FOR
SIDE-BY-SIDE SUSPENSION
SPEAKER ATTACHMENT
POINTS
