UNPACKING
AND INSPECTION
After unpacking the STC-1, save all of the packing
materials in case you ever need to ship the unit.
Thoroughly inspect the STC-1 and the packing materials
for signs of damage. Report any shipment damage to the
carrier at once. Report any equipment malfunctions to
your dealer.
Precautions
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
2
▲
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
▲
WARNING
DO NOT DEFEAT OR REMOVE THE GROUND PIN ON
THE POWER PLUG.
▲
WARNING
THIS UNIT CONTAINS NICKEL-CADMIUM
BATTERIES. RECYCLE OR DISPOSE OF PROPERLY.
