JBL SRX812P, User Manual

Page: 34 / 45

34
Symptom Likely Cause What to do
No sound
Speaker not connected
to active AC power
Verify that speaker is connected and that the circuit is on
Power not switched on Switch on power and verify that power LED is on
No sound, speaker is connected
to working AC power but won’t
come on.
Speaker power cable is faulty
or improperly connected.
‡5HVHDWWKHSRZHUFDEOHDWERWKHQGV
‡6XEVWLWXWHDNQRZQJRRGSRZHUFDEOH
No sound. Speaker comes on.
Signal source
(mixer, instrument, etc.)
is not sending. ‡&KHFN98PHWHUVRQWKHVRXUFHPL[HU
‡9HULI\WKDWWKHWDSHRU&'LVSOD\LQJ
‡8VHKHDGSKRQHVWRYHULI\WKDWWKHLQVWUXPHQWLVDFWXDOO\
sending an audio signal
Faulty cables and
connections
‡'LVFRQQHFWDQGUHVHDWVLJQDOFDEOHV
‡5HSODFHVXVSHFWHGFDEOHZLWKDNQRZQJRRGFDEOH
No sound with microphone
connected directly to the input. Microphone requires
phantom power
7KH65;GRHVQRWVXSSO\SKDQWRPSRZHU6ZLWFKWRDG\QDPLF
microphone, use a battery powered microphone (if possible),
use an external phantom power supply for condenser type microphones.
Signal sounds distorted and
very loud, PEAK light is lit
most of the time. Excessive input signal, trying
to exceed the capabilities of
the speakers ‡5HGXFHWKHRXWSXWOHYHORIWKHVRXUFH
‡7XUQGRZQWKHOHYHOFRQWUROVRQWKHVSHDNHU
‡8VHDGGLWLRQDO65;VSHDNHUV
Signal sounds distorted even at
moderate volumes, LIMIT light
is not lit.
Mixer or other source
is overdriven
5HYLHZWKH2ZQHU¶V0DQXDOIRU\RXUPL[HUDQGDGMXVWFRQWUROVDVQHHGHG
‡,QSXWVHQVLWLYLW\JDLQ
‡&KDQQHOIDGHUV
‡0DVWHUIDGHUV2QFHWKLVLVGRQHUHYLHZWKHLQVWUXFWLRQVLQWKH4XLFN
Start section of this guide.
Lots of hiss in the sound,
the mixer controls are at
very low settings.
Improper gain structure
‡0DNHVXUHWKDWWKH0,&/,1(VZLWFKLVLQWKH/,1(GLVHQJDJHGSRVLWLRQ
‡5HGXFHWKHOHYHOVHWWLQJVDWVSHDNHU5HYLHZWKH2ZQHU¶V0DQXDOIRU
\RXUPL[HUDQGDGMXVWFRQWUROVDVQHHGHG
‡,QSXWVHQVLWLYLW\JDLQ
‡&KDQQHOIDGHUV
‡0DVWHUIDGHUV
Noise or hiss heard at output. Noisy source device
Disconnect the devices that are connected to your speaker one at a time.
If the noise goes away, the problem is with the source or the
connecting cable.
Hum or Buzz that increases or
decreases when the mixer level
controls are moved.
,PSURSHU$&JURXQGRU
faulty equipment connected
to mixer input
'LVFRQQHFWRUPXWHFKDQQHOVRQHDWDWLPHWRLVRODWHWKHSUREOHP5HIHUWR
the owner’s manual of the faulty equipment for troubleshooting help.
Faulty cable between source
equipment and mixer
6XEVWLWXWHDNQRZQJRRGFDEOHIRUWKHVXVSHFWHGIDXOW\FDEOH
Hum or Buzz
,PSURSHU$&JURXQGLQJ
ground loops
‡µ/LIW¶WKHDXGLRJURXQGE\XVLQJDQ;/5)WR;/50DGDSWHURQRQHHQG
‡5HURXWHDXGLRFDEOHVDZD\IURP$&SRZHUDQGOLJKWLQJFDEOHV
Excessively long
unbalanced cable run
‡8VHWKHEDODQFHGRXWSXWVLIDYDLODEOHRI\RXUPL[HURUVRXUFH
HTXLSPHQWWRGULYH\RXU65;VSHDNHUV
‡8VHD³',´GLUHFWLQMHFWLRQER[WRFRQYHUW\RXUXQEDODQFHGHTXLSPHQW
output to a balanced output.
Improper system gain
structure 5HGXFHWKH,1387OHYHOFRQWUROVDQGLQFUHDVHWKHRXWSXWOHYHORI\RXU
source devices.
TROUBLESHOOTING