background image

15

ENJOYING JBL SOUNDGEAR

Using External

(Auxiliary) Sources

1. Switch on the auxiliary device (TV, VCR or
MP3 player) connected to the front or rear 

AUX 1 

or

AUX 2 

jacks. 

2. Select the desired auxiliary device by repeat-
edly pressing the 

Aux 1/2 

button 

5

.

3. See the Recording section on page 16 for
information on tape recording from an auxiliary
source.

Playing Tapes

Playback 

JBL Soundgear can only use normal bias tapes.
It is equipped with two cassette decks, “A” 
and “B”. Deck A is used only for playback, and
will stop at the end of each side of the tape.
Deck B may be used for either playback or
recording, and includes an auto reverse capability
which can be controlled with the 

Play Mode

button 

h

.

1. Switch the unit on 

¡

1

2. Open either cassette deck A or B by pressing
gently on the door at the 

Eject

position 

·

.

Insert the cassette with the tape side to the bot-
tom and the side that you wish to hear facing
the front. Gently push the door to close it.
3. Press the 

Tape A/B 

button 

¤

)!

. If 

necessary, press the button again to select the
other deck. JBL Soundgear will display which
deck has been selected 

cn

. The unit will

not select a deck that does not have a tape
loaded.
4. Auto reverse (for Deck B only):
Press the 

Play Mode 

button 

h

repeatedly to

select:
• One side

: Unit plays the side that is fac-

ing the listener and stops automatically at the
end of that side.
• All sides

: Unit plays the front and 

reverse sides and stops automatically at the 
end of the tape.
• Endless loop

: Unit plays both sides of

tape six times in succession. 
JBL Soundgear will display the current Play
mode 

k

.

5. Press the 

Play 

button 

c

7

to begin play-

back. Press the 

Reverse Play

button 

g

@

to

play the reverse side of the tape. The direction
of the tape will be indicated in the display 

h

6. In either the Stop or Play mode, press the

Fast Forward

›› ››

§

››

9

button to

fast forward to the desired point, or to the end
of the side. The

Fast Forward 

indicator 

m

will light in the display.
To rewind, in either the Stop or Play mode, press
the 

Rewind

‹‹ ‹‹

§

‹‹

#

button. The

Rewind 

indicator 

j

will light in the display.

7. To end playback, press the 

Stop/Reset 

button 

6

Alternatively, the unit will stop automatically at
the end of the tape. 

Tape Counter

The 

Tape Counter

c

will apppear in the

Information Display when in Tape mode.
During Play or Fast Forward, the 

Tape Counter

c

increases and, during rewind, the tape

counter decreases.
While in Stop mode or while playing, press the

Counter Reset 

button 

to reset the counter

to zero. This can be convenient for locating the
point at which you wish to begin a recording
session. Note, however, that JBL Soundgear 
will automatically rewind the tape to its 
beginning and it will not stop when the 
counter reaches zero. 

43

31

Summary of Contents for Soundgear SG2020





















Reviews: