JBL Simply Cinema DSC 1000 Owner'S Manual Download Page 2

I N C L U D E D

Four satellites for left/right
front and surrounds. Wall-
mount brackets. SCS 146
contains an additional satellite
to be used as surround back.

One center channel speaker .

Powered subwoofer.

2

For more than 55 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to the
recordings you play in your
home, car or office.

We’re confident that the JBL
system you have chosen will
provide every note of enjoment
that you expected – and that
when you think about
purchasing additional audio
equipment for your home, car

or office, you will once again
choose JBL.

For connection of the DSC
1000, please refer to the DSC
1000 Source manual.

JBL Consumer Products

T H A N K   Y O U   F O R   C H O O S I N G   J B L

Two 6.1-meter (20-foot) speaker
cables for connection from
receiver to subwoofer.

Three 4.6-meter (15-foot)
speaker cables for connection
from subwoofer to front
speakers and center speaker.

Two (Three in SCS 146) 12.2-
meter (40-foot) speaker cables
for connection from receiver to
left and right rear satellites and
surround back speaker. 
(SCS 146 only)

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To prevent electric shock,

 do not remove the grounding plug 

on the power cord, or use any plug 

or extension cord that does not have 

a grounding plug provided. 

Make certain that the 

AC outlet is properly grounded. 

Do not use an adapter plug 

with this product.

The lightning flash with arrowhead 
symbol, within an equilateral triangle, is 
intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product’s enclosure 
that may be of sufficient magnitude to 

constitute a risk of electric shock to 
persons.

The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance.

Declaration of Conformity

We, Harman Consumer International

2, route de Tours 
72500 Château-du-Loir
France

declare in own responsibility, that the product

described in this owner’s manual is in

compliance with technical standards:

EN 60065:1998

EN 55013/A14:1999

EN 55020/A14:1999

EN 61000-3-2/A14:2000

EN 61000-3-3/1.1995

EN 50081-1:1992

EN 50082-1:1992

Gary Mardell

JBL,

Harman Consumer International

France, 08/03

Summary of Contents for Simply Cinema DSC 1000











Reviews: