SDP-3 Digital Surround Processor/Controller
S
ystem
Configuration
13
DISPLAY ADJUST MENU
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
To adjust brightness, use SELECT to highlight BRIGHTNESS, and
▲
or
▼
to set display tbrightness for the room's lighting conditions. Press
DONE twice to return to the main menu.
Display Adjustment
Depending on the location of the SPD-3 in your room, you may need to
adjust the front panel display for optimum viewing. To adjust this display,
press the
▲
,
▼
or SELECT buttons on the Remote to enter the Main
Menu. Press
▼
twice to select DISPLAY ADJUST.
Press SELECT to highlight the Display Adjust Menu. Press
▼
to select
FRONT PANEL DISPLAY.
If you want to turn the front panel display off, use SELECT to highlight
STATUS, then use
▲
or
▼
to select OFF. Press DONE twice to return
to the main menu.
The Video On-Screen Display
MAIN MENU
EFFECT ADJUST
EQUALIZATION
DISPLAY ADJUST
SETUP
In addition to the front-panel display, the SDP-3 contains a character
generator for a video overlay display on monitors. Since the on-screen
display is capable of showing the full menu of options available at any
point, calibration of the system is faster and easier if the SDP-3 video
output is connected to a video monitor.
Adjustments to the on-screen display are made from the Display Adjust
menu. To display this menu, press the
▲
,
▼
or SELECT buttons on the
Remote to enter the Main Menu. Press
▼
twice to select DISPLAY
ADJUST.
Press SELECT to enter the Display Adjust menu. Press SELECT to
open the On-Screen Display menu.
MAIN MENU
EFFECT ADJUST
EQUALIZATION
DISPLAY ADJUST
SETUP
FRONT PANEL DISPLAY
STATUS
BRIGHTNESS
▲ ▼
Adjust with or
ON
75%
ON, OFF
25%, 50%, 75%, 100%
