background image

12

SCS300.7 System

Frequency Response

30Hz – 20kHz (–6dB)

Satellites

Maximum Recommended Amplifier Power 

100 Watts 

Nominal Impedance 

8 Ohms 

Sensitivity

88dB @ 1 Watt/1 meter

Frequency Response 

100Hz – 20kHz (–6dB)

Tweeter

One 1/2" (13mm) titanium-laminate dome,
video-shielded

Midrange 

Dual 3" (75mm) drivers, video-shielded

Dimensions (H x W x D) (not including shelf stand)

11-1/2" x 4" x 3-1/2" (292mm x 102mm x 89mm)

Weight

3 lb (1.4kg) 

Center

Maximum Recommended Amplifier Power 

100 Watts 

Nominal Impedance 

8 Ohms 

Sensitivity

88dB @ 1 Watt/1 meter

Frequency Response 

100Hz – 20kHz (–6dB)

Tweeter

One 1/2" (13mm) titanium-laminate dome,
video-shielded

Midrange

Dual 3" (75mm) drivers, video-shielded

Dimensions (H x W x D) (not including shelf stand)

4" x 11-1/2" x 3-1/2" (102mm x 292mm x 89mm) 

Weight

3 lb (1.4kg) 

Subwoofer

Amplifier 

150 Watts RMS

Frequency Response 

30Hz – 120Hz (–6dB)

Woofer

10" (250mm)

Enclosure 

Bass-reflex

Dimensions (H x W x D) (including feet)

20" x 13-3/4" x 15-3/4"
(508mm x 349mm x 400mm)

Weight 

35 lb (15.9kg)

SPECIFICATIONS 

All features and specifications are subject to change 
without notice.

*Trademarks of Dolby Laboratories.

DTS is a registered trademark of Digital Theater Systems, Inc.

DESIGN GOAL:

Bring the thrill of live performance and movie sound

to the home environment by calling on JBL’s professional engineering leadership.

SATELLITE TYPE:

Titanium-laminate-dome tweeter, 

sealed enclosure

SUBWOOFER TYPE:

Bass-reflex enclosure

PORT DESIGN:

FreeFlow

flared

PROFESSIONAL REFERENCE:

Cinema Loudspeaker Series

OWNER’S GUIDE

P R O D U C T

L I N E :  

MODEL:

SCS300.7

SURROUND CINEMA
SPEAKERS

© 2004 Harman International Industries, Incorporated 

JBL is a registered trademark of 
Harman International Industries, Incorporated.

Part No. 406-000-00959

PRO SOUND 
COMES HOME

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

516.255.4JBL (4525)  

www.jbl.com

Summary of Contents for SCS300.7













Reviews: