background image

4

SPEAKER PLACEMENT

SUBWOOFER

SURROUND SPEAKERS

    5 – 6 ft

FRONT 
SPEAKERS

0-2 ft

The front speakers should be
placed the same distance
from each other as they are
from the listening position.
They should be placed at
about the same height from
the floor as the listeners’
ears will be, or they may be
angled toward the listeners.

The center channel speaker
should be placed slightly
behind the front left and right
speakers, and no more than
two feet above or below the
tweeters of the left and right
speakers. It is often con-
venient to set the center
speaker on top of the tele-
vision set, as shown in the
drawing. Use the supplied
support leg to aim it toward
the listener by screwing the
leg in to angle the speaker
up, or unscrewing the leg

slightly to angle the speaker
down.

Two of the surround speak-
ers should be placed slightly
behind the listening position
and, ideally, should face
each other and be at a level
higher than the listeners’
ears. If that is not possible,
they may be placed on a wall
behind the listening position,
facing forward. The surround
back speaker should be
placed on the wall behind
the listening position, facing
the center channel speaker.
You may leave the surround
back speaker out of your
system altogether if your
receiver/processor only sup-
ports 5.1 channels. The sur-
round speakers should not
call attention to themselves.
Experiment with their place-

ment until you hear a diffuse,
ambient sound accompanying
the main-program material
heard in the front speakers.

The low-frequency material
reproduced by the subwoofer
is mostly omnidirectional,
and this speaker may be
placed in a convenient loca-
tion in the room. However,
bass reproduction will be
maximized when the sub-
woofer is placed in a corner
along the same wall as the
front speakers. Experiment
with subwoofer placement
by temporarily placing the
subwoofer in the listening
position and moving around
the room until the bass
reproduction is best. Place the
subwoofer in that location.

CENTER CHANNEL
SPEAKER

Summary of Contents for SCS160SI













Reviews: