JBL SCS160SI Owner'S Manual Download Page 12

12

SCS160 System

Frequency Response

30Hz – 20kHz (–6dB)

Satellites

Recommended Power 

10 – 100 Watts 

Impedance

8 Ohms nominal 

Sensitivity

88dB @ 1 Watt/1 meter

Tweeter

One 1/2" (13mm) titanium-laminate dome,
video-shielded

Midrange

Dual 3" (75mm) drivers, video-shielded

Dimensions (H x W x D) 

8-1/8" x 3-1/2" x 3-7/8"
206mm x 89mm x 99mm

Weight

2.65 lb/1.2kg 

Center

Recommended Power 

10 – 100 Watts 

Impedance

8 Ohms nominal 

Sensitivity

88dB @ 1 Watt/1 meter

Tweeter

One 1/2" (13mm) titanium-laminate dome,
video-shielded

Midrange

Dual 3" (75mm) drivers, video-shielded

Dimensions (H x W x D)

3-1/2" x 8-1/8" x 3-7/8"
89mm x 206mm x 99mm

Weight

2.65 lb/1.2kg

Subwoofer

Amplifier 

150 Watts RMS

Woofer

10" (250mm) 

Enclosure

Bass reflex

Dimensions (H x W x D) 

17-3/4" x 15-3/4" x 16-3/4"
451mm x 400mm x 426mm

Weight 

35 lb/15.9kg

SPECIFICATIONS 

All features and specifications are 
subject to change without notice.

*Trademarks of Dolby Laboratories.

DTS is a registered trademark of 
Digital Theater Systems, Inc.

DESIGN GOAL:

Bring the thrill of live performance and movie sound

to the home environment by calling on JBL’s professional engineering leadership.

SATELLITE TYPE:

Titanium-laminate-dome tweeter, 

sealed enclosure

SUBWOOFER TYPE:

Bass-reflex enclosure

PORT DESIGN:

FreeFlow™ flared

PROFESSIONAL REFERENCE:

Cinema Loudspeaker Series

OWNER’S GUIDE

P R O D U C T

L I N E :  

MODEL:

SCS160

SURROUND CINEMA
SPEAKERS

© 2003 Harman International Industries, Incorporated 

JBL is a registered trademark of 
Harman International Industries, Incorporated.

Part No. 406-000-00890

PRO SOUND 
COMES HOME

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

800.336.4JBL (4525) (USA only)  

www.jbl.com

Summary of Contents for SCS160SI













Reviews: