JBL SCS 138 Trio Owner'S Manual Download Page 3

3

I N C L U D E D

Four satellites for left/right
front and surrounds. Wall-
mount brackets.

One center channel speaker
with adjustable support leg.

Powered subwoofer.

For more than 50 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to the
recordings you play in your
home, car or office.

We’re confident that the JBL
system you have chosen will
provide every note of enjoment
that you expected – and that
when you think about
purchasing additional audio
equipment for your home, car

or office, you will once again
choose JBL.

JBL Consumer Products

T H A N K   Y O U   F O R   C H O O S I N G   J B L

Two 6.1-meter (20-foot) speaker
cables for connection from
receiver to subwoofer.

Two 4.6-meter (15-foot) speaker
cables for connection from
subwoofer to front speakers.

Three 12.2-meter (40-foot)
speaker cables for connection
from receiver to left and right
rear satellites and center
speaker.

23. Non-use Periods.

The power cord of

the product should be unplugged from the
outlet when left unused for long periods of
time.

24. Lightning.

For added protection for this

product during a lightning storm, or when it
is left unattended and unused for long
periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the
product due to lightning and power-line
surges.

25. Overloading.

Do not overload wall out-

lets, extension cords, or integral conven-
ience receptacles, as this can result in a
risk of fire or electric shock.

26. Damage Requiring Service.

Unplug this

product from the wall outlet and refer
servicing to qualified service personnel
under the following conditions:
a. The power-supply cord or the plug has

been damaged; or

b. Objects have fallen, or liquid has been

spilled into, the product; or

c. The product has been exposed to rain or

water; or

d. The product does not operate normally

when following the operating
instructions. Adjust only those controls
that are covered by the operating
instructions, as an improper adjustment
of other controls may result in damage
and will often require extensive work by
a qualified technician to restore the
product to its normal operation; or

e. The product has been dropped, or the

enclosure damaged; or

f. The product does not appear to operate

normally or exhibits a marked change in
performance.

27. Servicing.

Do not attempt to service

this product yourself, as opening or
removing covers may expose you to
dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.

28. Object and Liquid Entry.

Never push

objects of any kind into this product
through openings, as they may touch
dangerous voltage points or short-out
parts that could result in a fire or electric
shock. Never spill liquid of any kind on the
product. The apparatus shall not be
exposed to dripping or splashing and no
objects filled with liquids, such as vases,
shall be placed on the apparatus.

29. Heat. 

The product should be situated

away from heat sources such as radiators,
heat registers, stoves or other products
(including amplifiers) that produce heat.
Avoid installation in extremely hot or cold
locations, in an area that is exposed to
direct sunlight or near heating equipment.
When positioning the product in its final
location, make certain that it has adequate
ventilation on all sides, as well as on the
top and bottom.

Summary of Contents for SCS 138 Trio













Reviews: