manualshive.com logo in svg

JBL SCS 138 Trio, Owner'S Manual

Share
Download
JBL SCS 138 Trio Owner'S Manual Download Page 12

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797

Europe: 2. Route de Tours, 72500 Château du Loir, France

www.jbl.com 

©2001 JBL, Incorporated. 

JBL is a registered trademark of JBL, Incorporated.

Part No.1111-SCS138

Refinements may be made on occasion to existing products without notice, but will always meet or
exceed original specifications unless otherwise stated.
Simply Cinema is a registered trademark of JBL, Incorporated. 

*Dolby and Pro Logic are trademarks of Dolby Laboratories.

DTS

®

is a registered trademark of Digital Theater Systems, Inc.

SCS 138 Satellite

Frequency Response (-6dB):

120Hz – 20kHz

Sensitivity (2.83V/1m):

86dB

Nominal Impedance:

4 Ohms

Recommended Amplifier Power

10 – 50 Watts RMS per Channel

Drive Units:

12mm Titanium Laminate Dome Video-shielded HF
75mm Paper Cone Video-shielded Midrange

Dimensions (H x W x D):

111mm x 81mm x 95mm (4.4" x 3.2" x 3.7")

Weight:

0.5kg (1.1lb)

SCS 138 Center

Frequency Response (-6dB):

120Hz – 20kHz

Sensitivity (2.83V/1m):

88dB

Nominal Impedance:

4 Ohms

Recommended Amplifier Power

10 – 50 Watts RMS per Channel

Drive Units:

12mm Titanium Laminate Dome Video-shielded HF
Dual 75mm Paper Cone Video-shielded Midrange

Dimensions (H x W x D):

83mm x 194mm x 95mm (3.3" x 7.6" x 3.7")

Weight:

0.85kg (1.88lb)

SCS 138 Active Subwoofer

Low Frequency Cut-off:

35Hz

High Frequency Cut-off:

40 Hz - 160Hz Variable

Built-in Power Amplifier:

100 Watts RMS

Drive Unit:

200mm Paper Cone Long Throw Driver. Bass Reflex Enclosure

Dimensions (H x W x D):

450mm x 250mm x 360mm (17.7" x 9.8" x 14.2")

Weight:

13.6kg (30lb)

SCS138 System

Frequency Response (-6dB):

35Hz – 20kHz

O W N E R ’ S   G U I D E

PRODUCT LINE: 

SCS138 (230V)

DESIGN GOAL:

Bring the thrill of live performance and movie sound to the

home environment by calling on JBL’s professional engineering leadership.

SATELLITE TYPE:

Titanium-laminate-dome tweeter, sealed enclosure

SUBWOOFER TYPE: 

Bass-reflex enclosure

PORT DESIGN: 

FreeFlow™ flared

PROFESSIONAL REFERENCE:

Cinema Loudspeaker Series

®

MODEL
NUMBER:

P R O   S O U N D  
C O M E S   H O M E

™

S P E C I F I C A T I O N S  

Summary of Contents for SCS 138 Trio













Reviews:

No comments

Brands by name

Popular brands

Load more brands