Wireless Transmitter
Wireless Receiver
3
THANK YOU FOR CHOOSING
A JBL
®
PRODUCT
For more than 60 years, JBL has been involved in every aspect of
music and film recording and reproduction, from live performances
to the recordings you play in your home, car or office.
We’re confident that the JBL system you have chosen will provide
every note of enjoyment that you expected – and that when you think
about purchasing additional audio equipment for your home, car or
office, you will once again choose JBL.
Please take a moment to register your product on our Web site at
www.jbl.com. It enables us to keep you posted on our latest
advance-ments, and helps us to better understand our customers
and build products that meet their needs and expectations.
The JBL
®
On Air WEM-1 is an advanced wireless system that allows
you to enjoy your favorite music in remote locations around your
home, or to add surround speakers to your home theater system
without running wires to the back of the room. To ensure trouble-free
performance, please carefully read these instructions completely
before connecting or using the system.
UNPACKING THE SYSTEM
Carefully unpack the system. If you suspect damage from transit,
report it immediately to your dealer and/or delivery service.
Keep the shipping carton and packing materials for future use.
Open the package and verify the following contents:
Included
1 x Owner’s manual
1 x USA warranty sheet
1 x Receiver-amplifier module
1 x Power supply for receiver-amplifier
1 x 120V AC power cord for receiver-amplifier power supply
1 x 230V AC power cord for receiver-amplifier power supply –
Schuko plug
1 x 230V AC power cord for receiver-amplifier power supply – UK
plug
1 x Handheld remote control
2 x Wall-mount brackets for receiver
1 x Pedestal – to be attached on receiver’s left side if receiver is
to be used vertically
1 x Transmitter module
1 x Power supply for transmitter
1 x 120V AC power cord for transmitter power supply
1 x 230V AC power cord for transmitter power supply – Schuko
plug
1 x 230V AC power cord for transmitter power supply – UK plug
1 x 6' (1.8m) Audio stereo cable, RCA-RCA
1 x Wall-mount bracket for transmitter
2 x Panhead M3 x 4 machine screws for attaching wall-mount
bracket to transmitter
4 x Small, round, self-adhesive feet – to be attached on
transmitter’s
left-side panel if transmitter is to be used vertically
INPUT
MUTE
VOL
Remote Control
Instructions for users on removal and disposal of used batteries.
Specification of included battery types.
These symbols shown on the product, the packaging or in the
manual or separate information
sheet mean that the product itself, as well as the batteries included
or built into the product, should never be thrown away with general
household waste. Take them to applicable collection points, where
proper treatment, recycling and recovery takes place, in
accordance with national or local legislation, or European
Directives 2002/96/EC and 2006/66/EC.
Correct handling of the product and batteries to be disposed helps
saving resources and prevents possible negative effects on the
environment or human health.
The batteries included with your equipment may be Alkaline, Carbon
Zink/Manganese or Lithium (button cells) type. All types should be
disposed of according to the above instructions.
To remove the batteries from your equipment or remote control,
reverse the procedure described for inserting batteries in the
Owners Manual.
For products with a built-in battery that lasts for the lifetime of the
product, removal may not be possible for the user. In this case,
ecycling or recovery centers handle the dismantling of the product
and the removal of the battery. If, for any reason, it becomes
necessary to replace such a battery, this procedure must be
performed by authorized service centers.
Pb
English
0053CSK - JBL OnAir WEM-1 ENG v6:34199_Control_2_4G_Eng 22/08/08 14:27 Side 3
