background image

29

Section 10

: Specifications

 

MSC1 Control Center Software Requirements

:

 

Use on a Macintosh Computer requires Macintosh version MSC1 Control Center Software and 

Macintosh Operating System.   

 

Windows OS Specs: 

Hard Drive: 200 MB available space • RAM: 1 GB minimum • CPU: Pentium (4) 1.6 GHZ or 

better ( Core™ 2 Duo recommended) • Operating System: Windows XP or Vista, 32-bit and 

64-bit • Internal Soundcard or External Audio Interface, compatible with Directx 9 • Minimum 

Screen Resolution: 1024 x 768
Macintosh OS Specs:  

Hard Drive: 200 MB available • RAM: 1 GB minimum • CPU: Power PC / Intel 2.6 GHZ or 

better (Duo core recommended) • Operating System: Tiger 10.4.11; Leopard 10.5 or later: 

Snow Leopard 10.6 Or later • Internal Soundcard or External Audio Interface • Minimum 

Screen Resolution: 1024 x 768

  S/N, Dynamic Range: 

110 dB typical, A-weighted, 20 Hz - 20 kHz

  Frequency Response: 

+0/-0.5dB, 20 Hz - 20 kHz

  THD+N: 

< 0.04% A/D/A, 20 Hz - 20 kH

  A/D Converters: 

24 Bit 64-times Oversampling Delta-Sigma

  D/A Converters: 

24 Bit, 8-times Oversampling Delta-Sigma

  Internal Processing: 

48 Bit, 48 kHz

  Maximum Input Level: 

+24 dBu, 6.5mm (1/4-inch) TRS Inputs;

   

+12 dBu, PHONO (RCA) Inputs

  Maximum Output Before Clipping: 

+17 dBu, 0.025% THD

  Input Impedance: 

20k ohms 6.5mm (1/4 inch) TRS Inputs;

   

10k ohms PHONO (RCA) Inputs

  Output Impedance: 

100 ohms

  Power Requirements: 

12 VDC, 0.5A

  Dimensions (w x d x h): 

198 x 165 x 83 mm (7.8 x 6.5 x 3.25 in)

  Shipping Weight Including Accessories:

  1.96 kg (4.3 lbs.)

"A" Left and Right Speaker

 

Feature 

Range

  LF EQ Boost/ Cut: 

+/- 3 dB in 0.25 dB increments

  HF EQ Boost/Cut: 

+/- 3 dB in 0.25 dB increments

  LF EQ Frequency: 

34 Hz to 1.1 Hz

  HF EQ Frequency: 

2.5 kHz to 17 kHz

  Level Trim: 

+0/-12 dB in 0.25 dB increments

  Available Delay: 

0 to 114 cm (3 feet 9 inches) in 2.54 cm  

   

(1 inch) increments

Subwoofer "A" Output

  Feature 

Range

  Sub Level: 

+/-10 dB in 0.25 dB increments

  Bass Management Crossover: 

60 Hz, 80 Hz, 120 Hz

  Sub Polarity: 

0 degrees, 180 degrees

  Available Delay: 

96.5 cm (3 feet 2 inches) in 2.54 cm (1 inch) increments

RMC Parameters Filters

  Left and Right Speakers: 

5 filters. Range: 32 Hz to 350 Hz. Gain: +0/-18 dB

  Subwoofer: 

2 filters. Range: 28 Hz to 150 Hz. Gain: +0/-18 dB

Summary of Contents for MSC1





































Reviews: