JBL MR-140 Operation Manual Download Page 6

Installation

4

1. Precautions

Choose the mounting location carefully so that the unit will not interfere with the 
normal driving functions of the boat. 
Avoid installing the unit where it would be subject to high temperature (such as from 
direct sunlight or hot air) or where it would be subject to dust, dirt or excessive 
vibration. Use only the supplied mounting hardware for a safe and secure installation. 

2. Mounting angle adjustment

       

Adjust the mounting angle to less than 20 degrees from the horizontal position.  

3. Mounting example

 

    

1

2

4

Release Key

Half Sleeve

Tap

Bend these claws, if necessary.

3

<< Installation in the cabinet >> 

Note

 

Keep the release key in a safe place as you may need it in future to remove 

                the unit from the boat.

6. IEQ button(4)

The IEQ feature creates a realistic atmosphere for the style of music you select using
the latest digital sound technology.

Pressing this key repeatedly allows you to select from the following features :

- "

FLAT

" display - normal operation mode 

- "

CLASSICS

" display - for the dramatic depth of classical music in an auditorium

- "

POP

" display - for the electric excitement of stadium pop

- "

ROCK

" display - for the subtle extension of the music's dimensions 

- "

DSP OFF

" display - cancel the sound feature

7. TIME/FREQUENCY (T/F) button (15)

1) After your unit has been installed in the boat, turn power on. The radio frequency will
    appear on the display.
2) Press T/F button once to display time mode.
    Press T/F button once again (within 5 seconds) and hold until the displayed time begins
    to blink.
3) Turn the spindle knob counter clockwise to set the minutes.
4) Turn the spindle knob clockwise to set the hour.
5) Once the adjustment is completed, press T/F button. The displayed time will stop
    blinking and within 5 seconds will revert to radio frequency.

8.MUTE button (14)

Press MUTE button(14) to mute sound. Press again to restore volume to original setting.

 

9

Controls (continued)

Summary of Contents for MR-140









Reviews: