JBL LSR2310SP, Owner'S Manual

Page: 18 / 22

18
Section 9: Appendix B
Specifications
LSR2328P LSR2325P
LSR2310SP
Frequency Response: (+3, -3 dB) 53 Hz – 18 kHz (+3, -3 dB) 60 Hz - 18 kHz (-6 dB) 36 Hz - 85 Hz
Low Frequency Extension (-10dB): 37 Hz 43 Hz 29 Hz
Low-High Frequency Crossover: 2.0 kHz 4th-order acoustic Linkwitz-
Riley 1.7 kHz 4th-order acoustic Linkwitz-Riley
Maximum Continuous SPL each / Per Pair
@ 1m
>103 dB SPL / >109dB SPL >99 dB SPL / >105dB SPL >102 dB SPL (35Hz-80Hz)
Maximum Peak SPL Each/ Per Pair @ 1m >117 dB / >123 dB SPL / 1m >112 dB / >118 dB SPL / 1m 113 dB
Input Connectors:
Balanced XLR, 1/4" tip-ring-sleeve
and unbalanced RCA. Positive voltage
applied to XLR pin 2 , 1/4" tip, RCA pin
produces outward woofer motion Balanced XLR, 1/4" tip-ring-sleeve and
unbalanced RCA. Positive voltage applied
to XLR pin 2 , 1/4" tip, RCA pin produces
outward woofer motion L&R: Balanced XLR (2), 1/4" tip-ring-sleeve
(2) and unbalanced RCA (2). Positive voltage
applied to XLR pin 2 , 1/4" tip, RCA pin
produces outward woofer motion
Calibrated Input Sensitivity, XLR & 1/4":-
10dBV
96 dB SPL / 1 m 96 dB SPL / 1 m 96 dB SPL / 1 m (80 Hz BM)
RCA Input:-20dBV 96 dB SPL / 1 m 96 dB SPL / 1 m 96 dB SPL / 1 m (80 Hz BM)
Output: Connectors:
- - - - - -
L&R: Balanced XLR (2), 1/4" tip-ring-
sleeve (2).
AC Input Voltage: 115 / 230 VAC, 50/60 Hz 115 / 230 VAC, 50/60 Hz 115 / 230 VAC, 50/60 Hz
AC Input Voltage Operating Range +/- 15% +/- 15% +/- 15%
AC Input Connector: IEC with User Replaceable Fuse IEC with User Replaceable Fuse IEC with User Replaceable Fuse
Replaceable Fuse Type (120 Volt / 240
Volt)
4 amp Time Lag 250V/ 2 amp Time
Lag 250V 4 amp Time Lag 250V/ 2 amp Time Lag
250V 5 amp Time Lag 250V/ 2.5 amp Time Lag
250V
Long-Term Maximum System Power: 100 watts (IEC265-5) 22 watts (IEC265-5) 150 watts (IEC265-5)
Controls:
Volume Range -infinity dB - 0 dB -infinity dB - 0 dB -infinity dB - 0 dB
High Frequency Control (7 kHz Shelving): +2.5 dB, 0 dB, -2.5 dB +2.5 dB, 0 dB, -2.5 dB
- - -
Low Frequency Control (120 Hz Shelving): +2.0 dB, 0 dB, -3.0 dB +2.0 dB, 0 dB, -3.0 dB
- - -
Crossover Frequency 80 Hz, 120 Hz, External
Transducers:
Low Frequency Model: 238G 235G
230H
Diameter: 203 mm (8 in) 132 mm (5.2 in) 254 mm (10 in)
Voice Coil: 38 mm (1.5 in) 25 mm (1.0 in) 51 mm (2.0 in)
Magnet Type: Magnetically Shielded Ferrite Magnetically Shielded Ferrite Magnetically Shielded Ferrite
Cone Type: Tempered Paper with Butyl Rubber
Compliance Tempered Paper with Butyl Rubber
Compliance Tempered Paper with Butyl Rubber
Compliance
Impedance: 4 ohms 4 ohms 8 ohms
High Frequency Model:
231H 231H - - -
Diameter: 25 mm (1 in) diaphragm 25 mm (1 in) diaphragm
- - -
Magnet Type: Neodymium Neodymium
- - -
Diaphragm Type: Silk Substrate with Epoxy Silk Substrate with Epoxy
- - -
Other Features: EOS Elliptical Oblate Spheroidal
waveguide with Elliptical Aperture EOS Elliptical Oblate Spheroidal
waveguide with Elliptical Aperture
- - -
Impedance: 8 ohms 8 ohms
- - -
Amplifier:
Low Frequency:
Topology: Class A-B, monolithic Class A-B, monolithic Bridged Class A-B, monolithic
Sine Wave Power Rating: 95 watts (<0.1% THD into rated
impedance) 50 watts (<0.1% THD into rated
impedance) 180 watts (<0.1% THD into rated
impedance)
THD + N, H Power: <0.03% <0.01% <0.05%
High Frequency:
Topology: Class A-B, monolithic Class A-B, monolithic
- - -