18
18
7.1.3 Auto wakeup
In standby mode, the soundbar will wake up automatically when
• the soundbar is connected to your TV through the HDMI ARC
connection and your TV is switched on;
• the soundbar is connected to your TV through the HDMI
ARC connection and through the HDMI connection, is also
connected to your digital device such as a set-top box, DVD/
Blu-ray player or game console, and your digital device is
switched on;
• the soundbar is connected to your home network and audio
is streamed to the soundbar through the music streaming
services over JBL One app, Chromecast built-in, AirPlay or
Alexa Cast.
7.2 Play from the TV source
With the soundbar connected, you can enjoy TV audio from the
soundbar speakers.
OPTICAL
HDMI eARC/
HDMI ARC
TV
1. Make sure that your TV is set to support external speakers
and the built-in TV speakers are muted. Refer to the owner’s
manual of your TV for more information.
2. Make sure that the soundbar has been properly connected
to your TV (See “
5.1 Connection with your TV and digital
3. To select the TV source, press on the soundbar or
TV
on
the remote control.
J
“TV”
: The TV source is selected.
•
In the factory settings, the TV source is selected by
default.
NOTES:
–
If the soundbar is connected to your TV through both an HDMI cable
and an optical cable, the HDMI cable source is selected for the TV
connection.
7.2.1 TV remote control setup
To use your TV remote control for both your TV and the soundbar,
check that your TV supports HDMI-CEC. If your TV does not
support HDMI-CEC, follow the steps under “
”.
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV user manual. You can control the /-, mute/
unmute, and power on/standby functions on your soundbar
through the TV remote control.
TV remote control IR learning
Through IR learning, your Infra-red TV remote control can learn
some commands of the soundbar.
1. On the soundbar, press and hold and until
“LEARNING”
is displayed.
J
You enter the TV remote control learning mode.
2. Point your TV remote control at the soundbar. Follow the
screen instructions to operate the buttons on your TV remote
control:
•
When any one of
“POWER”
,
“VOL+”
,
“VOL-”
, or
“MUTE”
is displayed on the soundbar, press the desired
button on your TV remote control.
J
“DONE”
: The functions of the soundbar button are
learnt by your TV remote control buttons.
J
The soundbar returns to the last selected source.
•
To stop and exit the TV remote control learning mode,
press and hold and on the soundbar until
“EXIT
LEARNING”
is displayed.
J
The learnt functions are discarded.
NOTES:
–
The soundbar will exit the TV remote control learning mode
automatically if no action is taken for 30 seconds. The learnt
functions are discarded.
7.3 Play from the HDMI IN source
With the soundbar connected as shown, your digital device can
play video on your TV and audio from the soundbar speakers.
HDMI OUT
2
1
.
.
.
HDMI (ARC)
HDMI (ARC)
1. Make sure that the soundbar has been properly connected
to your TV and digital device (See “
Summary of Contents for Harman BAR 700
Page 1: ...BAR 700 OWNER S MANUAL...
