EVA Gasket
Black
C1006X
Crossover Network
Nut, M4x0.7Px3t
mm Zinc-Plated
Nut
M5x0.8mm
Zinc-Plated
Die-Cast Alum.
Safety Ring, Black
Spring
Washer
C1004X
Metal Grille, Black
C1004X-S
Metal Grille, Silver
Tweeter
Diffuser
Control 1X – C1005X
Control 1Xtreme – C10028X
Control One C10028A
Logo Badge
on Grille
Front Baffle
Black
Control 1X/1Xtreme/One
(NOT for SALE)
Grille Holding Ring
Black
C1003X
4-1/2" Woofer
C1002X
Tweeter
Screw
4x8mm
Black-Plated
Screw
T4x35mm
Black-Plated
Screw
3.5x10mm
Black-Plated
Screw
4x18mm
Black-Plated
Contr
ol
®
1X/1Xtr
eme/One
Technical Manual
Control
®
1X/1Xtreme/One
EXPLODED VIEW
Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, New York 11797
5/08
TO SERVICE THE CONTROL 1X/1XTREME/ONE
1.
Remove the grille.
2.
Remove all (6) 1-3/8" Allen-head screws holding the front baffle to the enclosure.
3.
Separate the front baffle w/drivers from the enclosure.
DRIVER REMOVAL – Both woofer and tweeter are bonded to the front baffle with adhesive.
Unclip FASTON connectors from both woofer and tweeter.
a)
Woofer removal:
Remove all (4) machine screws; rear nut can be held by long-nosed pliers while screws are turned.
Apply heat gun (750°) to area around woofer basket until adhesive softens enough to extract the woofer.
b)
Tweeter removal:
Remove both (2) Phillips screws.
Apply heat gun (750°) to area around inside of cavity until adhesive softens enough to extract the tweeter.
After removal, take care not to lose or misplace the small clear plastic diffuser should it become dislodged.
CAUTION: Too much heat applied in one area too long could warp the front baffle.
DRIVER REPLACEMENT
Both woofer and tweeter must have a bead of adhesive applied to the outer rim only upon reassembly.
Silicone sealer or rubber-to-metal cement is recommended.
