The following instructions apply to
both
the CBT1000 by itself and
to the CBT 1000+1000E System.
(For simplicity, drawings are shown with CBT1000 only.)
5) SLIDE SPEAKER WITH SPEAKER BRACKET ONTO WALL BRACKET
Make sure the
PIVOT BOLT
is installed in-place in the
SPEAKER BRACKET
. The
PIVOT BOLT
ASSEMBLY
consists of the M6 x 125 mm bolt with lock washer and flat washer on the head and secured
in place with flat washer, lock washer and M6 cap nut. IMPORTANT: Leave the nut loose (do not tighten).
Slide the speaker forward so that the
SPEAKER BRACKET
engages into the
WALL
BRACKET,
dropping the
PIVOT BOLT ASSEMBLY
into the hook slot of the
WALL BRACKET
.
For Down-Tilt or 0° Tilt
Install PIVOT BOLT before dropping
speaker into WALL BRACKET
Bolt Installed
Drop PIVOT BOLT into
hook slot of WALL BRACKET
For Down-Tilt or 0°
Hook Slot
For Up-Tilt
Bolt Installed
Drop PIVOT BOLT into
hook slot of WALL BRACKET
Install PIVOT BOLT before dropping
speaker into WALL BRACKET
Hook Slot
15
