led Indication table
13
Authentics L8
If a new version is available, download it from the JBl website
and proceed with the following upgrade method:
1. place the upgrade file downloaded from the website,
www.jbl.com onto the root directory of a usB drive.
2. Insert the usB drive into the top usB port on the
top panel (labeled ipad).
3. press the power and source buttons
simultaneously for five seconds. the system will
automatically begin the upgrade process.
NOTE: The upgrade process normally takes up to
30 minutes to complete. Do not attempt to operate
or remove power from the system during the
upgrade process.
If the upgrade process has not completed after 1 hour,
restart the system by removing and reconnecting AC
power, then begin the upgrade process again.
Factory Setting Reset
to restore all settings to the factory defaults, press and hold the
power button for at least 10 seconds. the following settings
will be reset:
• source
• Volume settings
• eQ settings
• airplay name
• wi-Fi settings
LED
State
Indication
power led
white, constant
Operational mode
amber, constant
sleep mode
Off
OFF/standby mode
Bluetooth led
white, constant
Bluetooth connected
white, regular Flash
Bluetooth disconnected and pairing mode
airplay led
white, On
airplay source active, wi-Fi info sharing
dlna led
white, On
dlna source active, wi-Fi Manual connect mode
aux-in led
white, constant
aux-in source active
Optical led
white, constant
Optical source active
Volume leds
white, constant
Volume level
all leds
Flash five times
Factory settings restored
wireless charging
white, On
charging device recognition
white, Breathing
charging
white, Quick Flash
error indicator
LED Indication Table
