Features
Three-way floor standing design featuring:
A 250mm (10") polymer-treated pulp-cone low-frequency driver with 38mm (1-1/2") copper edge-wound voice coil.
A 045Ti 25mm (1") pure-titanium ultrahigh-frequency compression driver.
A 175Nd-3 44mm (1-3/4") Aquaplas-treated aluminum-dome high-frequency compression driver.
Utilizes a vertically oriented, enclosure-less Bi-Radial-horn configuration to provide spacious, dynamic and
natural sound quality.
Incorporates a high-performance JBL 175Nd high-frequency compression driver with an edge-wound aluminum voice coil,
neodymium motor assembly and Aquaplas-treated aluminum dome, mated to a rapid-flare phase plug and the Bi-Radial-horn
assembly.
015M transducer that features a 22mm (0.88") Mylar
®
diaphragm, directly mounted to the top of the Bi-Radial horn. To
achieve tight, musically natural bass response, the 1000 Array employs a 250mm (10") polymer-treated pulp-cone woofer.
Built to the same uncompromising quality and construction standards as every Project Array model, the 1000 Array is
equally adept at movie soundtrack and music reproduction, with a smooth tonal balance; transparent, musically inviting
midrange; and open, extended high frequencies.
Project Array
TM
– 1000 Array
High-performance loudspeaker
Harman Consumer Group, Inc.
2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA
www.jbl.com
© 2007 Harman International Industries, Incorporated. All rights reserved. JBL, Bi-Radial and K2 are trademarks of Harman International Industries,
Incorporated, registered in the United States and/or other countries. Project Array is a trademark of Harman International Industries, Incorporated.
Mylar is a registered trademark of E.I. du Pont de Nemours and Company.
Features, specifications and appearance are subject to change without notice.
