background image

 

12 

  

 

Varyscan

®

 4 1200 HMI 

 

 

Part no. 1.  

motor 

 

Part no. 2.  

Tellerfedern 

 

Part no. 3.  

Stahllaserteil 

 

Part no. 4.  

Kunststoffscheibe 

 

Part no. 5.  

zu montierendes Teil 

 
Part no. 5 has to be pushed on the axis of the stepper motor until 
the parts no. 2 can not be compressed anymore. After remove the 
part no. 5 about 0,5 mm and  turn the fastening screws. The 
"motor-brake" is now optimum adjusted . 
 

Regular Maintenance Performances 

 
Warning

: Before open the appliance pull out mains plug! 

 
Open the casing by turning out the screws at the top of the Varyscan

®

To be able to take out the slide-in modules of your Varyscan

®

, you have to screw off two screws 

of silver at the side-piece, up to the mark of the slide-in modules. Now you are able to take out 
the slide-in modules (sketch page 4). 
 

Attention

Do not forget to lock in the slide-in modules after having completed  

 

 

 

your maintenance performances, by screwing in the screws of silver    

 

 

carefully! 

 

1. Cleaning of all optical parts 

 
You should clean the optical parts of your Varyscan

®

 periodically to restore maximum brightness 

of the scan. After having opened the casing as explained above, take out the effect wheel slide-in 
(see sketch page 4) and put it on an underlay in front of you. Take a fuzz-free rag and a detergent 
for windows and clean the effect filters on the effect wheel. 
Subsequently clean both lenses (sketch page 4). In order to clean the lens easily, loosen the 
screw which fixes the lens and remove  the lens. Now it is easy to clean from the outside and the 
inside. Take out the colour wheel slide-in in order to clean the dichroitic filters. Put in the lens, 
the effect wheel slide-in and the colour wheel slide-in. Do not forget to tighten the screw which 
fixes the lens. 
 

2. Cleaning of ventilation 

 
You should check regularly the function of the ventilators. Above all take care that ventilation 
inlets and the interior of the Varyscan* are free from fuzzes and other dust. Open both lids of your 
Varyscan

®

, by screwing off the screws from the lids. Now clean your Varyscan* carefully with a 

vacuum cleaner. Now screw down the lid. Take care that you use the sheet metal screws for 
closing the smaller lid. 

 

Summary of Contents for Varyscan 4 1200 HMI


























Reviews: