Maintenance
- Before carrying out maintenance, always disconnect the power supply and allow the equipment
to cool down.
- Periodically check all cable and tube connections.
- Replace a blown Fuse as follows:
1.
Pull off the Fuse Holder and remove the
Fuse. If necessary, use a flat screwdriver to
lever it off.
- Replace any defective or damaged part. Only use original JBC spare parts.
- Repairs should be performed only by a JBC authorized technical service.
Fuse
Holder
2.
Insert the new Fuse into the Fuse Holder and
return it to the station.
8
