7
Unscrew the housing.
(4 screws)
To have access to the connection you need loose
the screws and release the frontal part carefully
Carefully remove the housing.
Connect the USB cable adaptor into the socket.
Plug the power cord. Plug the USB cord to the PC.
Turn the station ON.
Reprogram the station (see software manual).
Once the programming operation it’s done:
-Turn OFF the station
-Unplug the power cord from the station
-Unplug USB cable from the PC and the station
-Assembly the cover. Take care of the jumpers.
-Screw the housing and stick the bumper.
JT/TE HOT AIR STATIONS /
DISSASSEMBLY
