4
Unscrew the lid. (4 screws)
Connect the USB cable adaptor into the frontal
circuit socket.
Carefully remove the lid.
Place the lid without screwing.
Plug the power cord. Plug the USB cord to the PC.
Turn the station ON.
Reprogram the station (see software manual).
Once the programming operation it’s done:
-Turn OFF the station
-Unplug the power cord from the station
-Unplug USB cable from the PC and the station
-Assembly the lid. Take care of the jumpers, ensure that they are well connected.
-Screw the Lid.
DI CONTROL UNIT/
DISSASSEMBLY
