Main Menu
Main Menu
5 Tin Reload Process
6 Counters
7 Software Version
1
Reset settings
2 Station settings
3
Tool settings
4 Programs Settings
Exit
Exit
Backward Forward
Reload Process
Reload Process
Press enter when finished
OK
OK
OK
Tool Assembly
Connect the tool to the control unit following
this steps:
Insert and push the guide nozzle until the end
(1) and tighten the screw (2).
Connect the jack (3).
Solder Wire Loading
Put the solder reel into its support (1).
Introduce the solder wire into the inlet nozzle (2)
until it reaches the wheels (3).
Use the
Tin Reload Process
in the
Main Menu (4).
The Relaod Process screen opens.
Press to start the process.
Make sure the wire passes through the Interme-
diate Nozzle and enters into the Guide Tube (5).
1
3
Inlet
Nozzle
1
2
Insert to the end
4
Intermediate
Nozzle
To Guide Tube
2
3
5
4