jbc NANE-B, Manual

Page: 5 / 16

¥
ø 0,3
ø 0,6
0,7
3,5
0,2 x 0,1
5
2
1
55
Changing cartridges
Save time and change cartridges safely without having to switch the station off.
All the cartridges shown are actual size. All measurements are in millimiters (mm).
Contact JBC if you need alternative shapes.
Compatible cartridges
The NANE-B station works with C105 cartridge range.
See the full range in
www.jbctools.com
and find the model that best suits your soldering needs.
Removing Inserting Aligning
Place the cartridge in the slot
as shown and pull the handle
to remove it. Push the cartridge into the
handle to the mark*. Use the holes to rotate
the cartridges for a proper
alignment.
*Important
It is essential to insert the cartridges as far as the mark
for a proper connection.
Special models Round Chisel Round bent Bevel
Mark
www.jbctools.com