11
11
11
Maintenance
1.
Pull off the fuse holder and remove the fuse.
If necessary use a tool to lever it off.
2.
Press the new fuse into the fuse holder and
replace it in the station.
Fuse holder
Fuse
holder
Fuse
Before carrying out maintenance, always allow the equipment to cool.
- Clean the station screen with a glass cleaner
or a damp cloth.
Clean
periodically
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
- Use a damp cloth to keep the casing and the
tool clean. Alcohol can only be used to clean
the metal parts.
- Maintain tip surface clean and tinned prior to
storage in order to avoid tip oxidation. Rusty
and dirty surfaces reduce heat transfer to the
solder joint.
- Periodically check all cables and tubes.
- Periodically check that the metal parts of the
tool and stand are clean so that the station
can detect the tool status.
- Replace a blown fuse as follows:
www.jbctools.com
Summary of Contents for NANE-B
Page 1: ...Nano Soldering station Ref NANE B www jbctools com...
Page 13: ...13 13 13 Exploded View www jbctools com...
Page 14: ...14 14 14 Notes...
Page 15: ...15 15 15 www jbctools com...
