background image

666

JBC Net

Export graphics

Insert a USB flash drive into the 
USB-A connector to save your 
soldering process in csv format.

Profi les

Advanced Functionalities

It provides detailed graphics of tip temperature and power delivery in real time during 
solder joint formation for analysis purposes. This helps you decide how to adjust your 
process or which tip to use to obtain the best quality soldering.

Graphics

Get greater quality and control in your production.
Manage your whole soldering process remotely in real time.
For more information see 

www.jbctools.com/webmanager.html.

Designed to avoid thermal shock when soldering Ceramic Chip components like 
MLCC, this new and unique feature allows controlling the heating ramp up rate of the 
tool to gradually increase the temperature of the component through all the phases of 
the soldering process. Up to 25 fully confi gurable soldering profi les can be stored.

USB fl ash drive is connected.

 

 

 

                          

Station is controlled by a PC.

Station is controlled by a robot.

System notifications

Station software update. 
Press INFO to start the process.

Warning. 
Press INFO for failure description. 

Error. 
Press INFO for failure description, 
the type of error and how to proceed.

The following icons will be displayed on the screen’s status bar.

Station update

Download the JBC Update File from 

www.jbctools.com/software.html

Insert the USB flash drive with the 
file downloaded to the station.

Files

Update

Summary of Contents for NAN





















Reviews: