![background image](http://html1.mh-extra.com/html/jbc/jna/jna_instruction-manual_3864845008.webp)
For rework jobs the use of preheaters is highly recommended.
JBC Preheaters
Applying high temperatures (350 ºC - 450 ºC / 660 ºF - 840º F) for a long time can damage both,
the printed circuit and the electronic components. In addition, significant temperature differences
between two points on a PCBA can also damage it due to the stress generated by expansion.
Preheating is a process that minimizes thermal stress and allows the welding process to take no
longer than it should.
For most rework processes JBC recommends a preheat temperature between 90 and 130 ºC / 195
and 265 ºF and not exceed a heating rate of 4 ºC/s. With the use of JBC preheaters, a homoge-
neous and controlled heating is achieved within the recommended parameters.
8
Summary of Contents for JNA
Page 1: ...JNA High Precision Hot Air Station INSTRUCTION MANUAL...
Page 13: ...Notes www jbctools com 13...
Page 14: ...Notes 14...