jbc HD 4700, Instruction Manual

Page: 5 / 32

3
ENGLISH
RECOMMENDATIONS FOR USE
For soldering and desoldering
- Clean the contacts and the printed circuit
to be desoldered of dust or dirt.
- Preferably select a temperature below
350°C (662ºF). Excess temperature may
cause the printed circuit tracks to break
loose.
- The tip must be well tinned for good heat
conduction. If it has been inoperative for
any length of time, it should be retinned.
Safety measures
- Incorrect use of this tool may cause fire.
- Be cautious when using the tool in places
where inflamable products are stored.
- Heat can cause fire to inflamable products
even when they are not in sight.
- D o n o t u s e w h e n t h e a t m o s p h e r e i s
explosive.
- Place the tool back on its stand in order to
let it cool down before you store it.