6
Maintenance
Before carrying out maintenance or storage, always unplug the tool.
- Check periodically that the metal parts are clean to ensure a good detection when it is in the stand.
Use a damp cloth or alcohol.
- Periodically check all cables and tubes connections.
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Tin Deposit Maintenance
Then its spiral must be removed to clean the inner
part of the deposit with the provided stick.
- The condition of the filter and internal joint must
be checked and replaced if dirty or damaged.
For this, the lid needs to be unscrewed with the
DR560 in vertical position.
The deposit needs to be inserted with spiral filter put
into place, positioned between the 2 lines marked
on the tin deposit. Then the whole must be closed
by screwing the lid 1.
Check filter
Check
internal joint
2
3
1