background image

Peripherals

Port 2-PA

17:14

Pedal

PD_a

Module

MSE

Pedal

PD_a
PD_b

None

Peripherals

Port 2-PA

17:14

Pedal

PD_a

Module

MSE

Peripherals

Port 2-PA

17:14

Pedal

PD_a

Function

Extractor

Mode

released

Minimum time

0 sec

Back

Peripherals

Port 2-DR

17:14

Pedal

None

Module

None

Module

MSE_a

None

Pedal Initial Set up 

(Ref. P-005)*

1.

Enter the 

Peripherals 

Menu

 

and 

select the

port

 which you want to join to the pedal.

2.

Select the pedal from the list (

Note that your

first connection is denoted as “a”, the second
being “b”, etc. (e.g. PD_a, PD_b,...)

.

3.

Set the pedal function according to your work needs:

Select how the pedal 
acts: as 

Sleep

Extractor

 (hibernation) 

or as a 

module

 switch.

Select the activating 
mode of the pedal
(

pressed

/

released

)

Set the duration 
of the activation 
time when pressing 
the pedal once**. 
For continuous 
functioning keep the 
pedal pressed.

**NB: The same can be applied inversely when continually pressing the pedal and releasing to activate.

* These references are not included

1.

After connecting the module, enter the

Peripherals Menu and select the port which
you want to join with the module.

2.

Select the module from the list of peripheral

connections. Remember your first connection
is denoted as “a”, the second being “b”, etc.
(e.g. MS_a, MS_b,...).

3.

Press Menu or Back to save changes.

MSE/MVE Initial Set up 

(Ref. MSE-A / Ref. MVE-A)

*

6

Summary of Contents for DDPE-QB

















Reviews: