jbc DDE, Instruction Manual

Page: 7 / 16

Export graphics
Insert a USB flash drive into the USB-A
connector to save your soldering
process in csv format.
Profi les
Advanced Functionalities
It provides detailed graphics of tip temperature and power delivery in real time during
solder joint formation for analysis purposes. This helps you decide how to adjust your
process or which tip to use to obtain the best quality soldering.
Graphics
Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC,
this new and unique feature allows controlling the heating ramp up rate of the tool to
gradually increase the temperature of the component through all the phases of the
soldering process. Up to 25 fully confi gurable soldering profi les can be stored.
System Notifications
The following icons will be displayed on the screen’s status bar.
Station update
Download the JBC Update File from
www.jbctools.com/software.html
Insert the USB flash drive with the file
downloaded to the station.
Files
Update
USB fl ash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot down-
loaded to the station.
Station software update. Press INFO to start
the process.
Warning. Press INFO for failure description.
Error. Press INFO for failure description,
the type of error and how to proceed.
350
ºC
Port
1
Power
45%
Temp levels
T245
250 350 380
19:29
Port
1
T245
19:29
Sleep
Tool in the stand
Actual Temp. 180º
Delay to hibernation: 29:30
Port
1
T245
19:29
Hibernation
Actual Temp. 25ºC
Peripherals
19:29
Pedal PD_a
Module MSE
Pedal
PD_a
PD_b
None
Peripherals
19:29
Pedal PD_a
Module MSE
Peripherals
19:29
Pedal PD_a
Function Extractor
Mode released
Minimum time 0 sec
Back
Peripherals
Port 2-PA Port 2-PA
Port 2-PA
Port 2-PA
19:29
Pedal None
Module None
Module
MSE_a
None
350
ºC
Port
1
Power
45%
Temp levels
T245
250 350 380
19:29
Port
1
T245
19:29
Sleep
Tool in the stand
Actual Temp. 180º
Delay to hibernation: 29:30
Port
1
T245
19:29
Hibernation
Actual Temp. 25ºC
Peripherals
19:29
Pedal PD_a
Module MSE
Pedal
PD_a
PD_b
None
Peripherals
19:29
Pedal PD_a
Module MSE
Peripherals
19:29
Pedal PD_a
Function Extractor
Mode released
Minimum time 0 sec
Back
Peripherals
Port 2-PA Port 2-PA
Port 2-PA
Port 2-PA
19:29
Pedal None
Module None
Module
MSE_a
None
350
ºC
Port
1
Power
45%
Temp levels
T245
250 350 380
19:29
Port
1
T245
19:29
Sleep
Tool in the stand
Actual Temp. 180º
Delay to hibernation: 29:30
Port
1
T245
19:29
Hibernation
Actual Temp. 25ºC
Peripherals
19:29
Pedal PD_a
Module MSE
Pedal
PD_a
PD_b
None
Peripherals
19:29
Pedal PD_a
Module MSE
Peripherals
19:29
Pedal PD_a
Function Extractor
Mode released
Minimum time 0 sec
Back
Peripherals
Port 2-PA Port 2-PA
Port 2-PA
Port 2-PA
19:29
Pedal None
Module None
Module
MSE_a
None
350
ºC
Port
1
Power
45%
Temp levels
T245
250 350 380
19:29
Port
1
T245
19:29
Sleep
Tool in the stand
Actual Temp. 180º
Delay to hibernation: 29:30
Port
1
T245
19:29
Hibernation
Actual Temp. 25ºC
Peripherals
19:29
Pedal PD_a
Module MSE
Pedal
PD_a
PD_b
None
Peripherals
19:29
Pedal PD_a
Module MSE
Peripherals
19:29
Pedal PD_a
Function Extractor
Mode released
Minimum time 0 sec
Back
Peripherals
Port 2-PA Port 2-PA
Port 2-PA
Port 2-PA
19:29
Pedal None
Module None
Module
MSE_a
None
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Pedal Set Up
1.
Enter the
Peripherals
Menu and
select the
port
which you want to join to the pedal.
2.
Select the pedal from the list (
Note that your
first connection is denoted as “a”, the second
being “b”, etc. (e.g. PD_a, PD_b,...)
.
3.
Set the pedal function according to your work needs:
Select how the pedal
acts: as
Sleep ,
Extractor (hibernation)
or as a module switch.
Select the activating
mode of the pedal
(
pressed / released )
Set the duration
of the activation
time when pressing
the pedal once*.
For continuous
functioning keep the
pedal pressed.
*NB: The same can be applied inversely when continually pressing the pedal and releasing to activate.
1.
After connecting the module, enter
the Peripherals Menu and select the port
which you want to join with the module.
2.
Select the module from the list of
peripheral connections. Remember your
first connection is denoted as “a”, the
second being “b”, etc. (e.g. MS_a, MS_b,...).
3.
Press Menu or Back to save changes.
Peripheral Set Up