www.jbctools.com
6
7
2. Inserting
3. Aligning
4. Fixing
Align the tip of the cartridge. Use a flat pliers
for a correct tip alignment.
Do not over-tighten the cartridge.
Changing cartridge
For a safe cartridge change, unplug the tool or turn the station off before following these guidelines:
Loosen the screw and remove the cartridge.
Use a flat pliers if still hot.
1. Removing
Important:
Tighten the screw again being
careful not to over-tighten. This is necessary
for the tool to function.
Important:
Insert the cartridge as far as
the mark for a correct connection.
Mark
Alignment
Compatible cartridges
CP station works with C120 cartridge range. Find the model that best suits your soldering needs
in
www.jbctools.com
ø0,7
1,5mm
ø 0,2
5mm
6mm
C120-009
C120-010
C120-004
C120-001
C120-005
C120-009
C120-010
USB Connector
Download the latest software from our website to improve your soldering station.
JBC Updater
www.jbctools.com/software.html
Update the station software via USB connection:
Cable USB AB
JBC
Manager
JBC
Updater
JBC Manager
www.jbctools.com/manager.html
Manage and monitor as many stations as your PC can handle by using the JBC Manager. You can
export data to another PC.
Register Settings
Create graphs of the
soldering process in real
time with power and
temperature data.
Manager Settings
Change settings for a
group of JBC stations at
the same time.
any JBC
station
USB
Hub
Cable
USB AB