www.jbctools.com
38
39
Wechsel der Kartusche
Für einen sicheren Wechsel der Kartusche, den Netzstecker des Werkzeugs ziehen oder die Station
ausschalten, bevor die folgenden Anweisungen befolgt werden.
2. Einsetzen
3. Ausrichten
4. Fixieren
Ausrichten sie die Spitze der Kartusche.
Benutzen Sie eine Flachzange, um die Spitze
korrekt auszurichten. Sorgfältig darauf
achten, dass die Kartuschen nicht überdreht
wird.
Die Schraube lockern und die Kartusche
herausnehmen. Falls noch heiß, eine
Flachzange verwenden.
1. Entfernen
Wichtig:
Die Schraube wieder festziehen,
dabei darauf achten, sie nicht zu fest
anzuziehen. Dies ist notwendig, damit das
Werkzeug betrieben werden kann.
Wichtig:
Die Kartusche für einen korrekten
Anschluss bis zu der Markierung einschie-
ben.
Markierung
Ausrichtung
Kompatible Kartuschen
Die CP-Stationen arbeiten mit dem Kartuschen-Sortiment C120. Finden Sie das passende Modell für
Ihren Lötbedarf unter
www.jbctools.com
ø0,7
1,5mm
ø 0,2
5mm
6mm
C120-009
C120-010
C120-004
C120-001
C120-005
C120-009
C120-010
USB-Anschluss
Laden Sie die neueste Software von unserer Website herunter, um Ihre Lötstation zu verbessern.
www.jbctools.com/software.html
Aktualisieren Sie die Stations-Software über USB-Verbindung:
Kabel USB AB
JBC Manager
JBC Updater
Register Settings
erstellen Sie Grafiken des
Lötprozesses in echtzeit mit
Leistungs- und Temperatur-
daten.
Manager Settings
Ändern Sie einstellungen für
eine Gruppe von
JBC-Stationen gleichzeitig.
jede JBC
Station
USB
Hub
Cable
USB AB
www.jbctools.com/manager.html
Verwalten und überwachen Sie mit dem JBC Manager an einen PC angeschlossene Stationen:
JBC
Manager
JBC
Updater