![background image](http://html.mh-extra.com/html/jbc/cd-1bc/cd-1bc_user-manual_636992002.webp)
2
CD-1BC/2BC/9BC -
SOLDERING STATION
It is imperative to follow safety guidelines to protect health and prevent electric shock,
injury, fire or explosions.
SAFETY
- The mains cable must be plugged into approved bases.
- The tool should be placed in the stand when not in use. This way the sleep mode will be activated.
- The soldering tip and the metal part of the tool may still be hot even when the station is turned off.
Handle with care.
- The stand can also be hot. To adjust its position, turn the station off and wait until the cartridge
cools down.
- Be careful with the remains of liquid tin. In contact with skin, it can cause burns.
- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.
- Do not work on electrically live parts. Antistatic handle of soldering irons is electrically conductive.
- Be careful with the smoke produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working
to avoid any damage.
- This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
CAUTION
- Incorrect use of tool may cause fire.
- Be careful when using the tool in areas where inflamable products are stored.
- Heat can cause inflamable products to ignite even when not at sight.