Parameteter
Tool ID
PIN
Sensibility / Handle feel
Hibernation Delay
Shutdown Delay
Sleep Mode /
Sleep Temperature
Status Light
Tool Status
Tool Light Intensity
Description
Allows to change the tool identifier.
Enable/disable PIN request when modifying parameters. The PIN must be
entered every time a parameter is changed.
Allows to change the tool sensibility to detect the movement.
Set hibernation delay from 5 to 60 sec. Countdown starts when no
movement ist detected.
Set shutdown delay from 1 to 10 min. Countdown starts when no
movement ist detected.
Set sleep mode ON/OFF. The tip temperature will drop to the selected
sleep temperature.
Choose between 2 different modes to show tool status.
The tool status light indicates as follows the tool status:
- Green: working / soldering
- Green blinking: charging
- Red: low battery
- Red blinking: no cartridge
- No color: power OFF
Allows to change the tool light brightness.
Parameters
11
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm
