(Push this way to close the tweezers)
(Push this way to open the tweezers)
Normally open mode
Slide the knobs to switch
between modes
Normally closed mode
Upper sliding
knob
www.jbctools.com
3
1. Inserting
3. Rotational and Vertical Cartridge alignment
Changing cartridges
Unlock the fixing knobs and remove the
cartridges by using the cartridge extractor of
the stand (Ref. AT-SA).
2. Removing
Insert the cartridges as far as the mark
for a proper connection. Before inserting,
make sure the cartridges are clean to
ensure the proper functioning of the tool.
Mark
Slightly turn the wheels to align the cartridges
as required.
Once the alignment has been made, do not forget to fix the cartridges by tightening the fixing
knobs. A single turn of the knob is required to get them fixed.
!
The rear wheel guarantees that the
cartridges are equally aligned with vertical
symmetry when closing the tweezers.
Working Mode
Choose between a normally open and normally closed mode depending on the job to be done:
Summary of Contents for AT420-A
Page 1: ...Adjustable Tweezers Ref AT420 A www jbctools com...
Page 5: ...www jbctools com 5 Notes...
Page 6: ...6...
Page 7: ...www jbctools com 7...
