jbc AM 6500, Instruction Manual

Page: 13 / 29

12
Ref. 5600-001 5600-002 5600-003 5600-004 5600-005 5600-006 5600-007
5600
A ø (mm)
B
ø (mm)
max. pin ø
(mm)
001 / 011
1.4
0.6
0.4
002 / 012
1.8
0.8
0.6
003 / 013
2.7
1
0.8
004
3.2
1.3
1.1
005
3.4
1.6
1.4
006
4.2
2
1.7
007
4.8
2.5
2.3
A ø
B ø
5600-012 5600-013 5600-011
DESOLDERING TIPS
These tips are
specially designed to
clean the pads.
Change of desoldering tip
This operation should be done while the tip is
hot, at a minimum temperature of 482°F, so that
any tin left inside is in molten state.
- Unscrew the tip to be replaced, with the aid
of the spanner supplied.
- Fit the new tip, and tighten up with the
spanner to achieve a good air tightness.
To empty the solder tin deposit and change
the filter
For this, the lid needs to be unscrewed and first
the tin deposit and then its spiral must be
removed to clean the inner part of the deposit
with a brush.
- The condition of the filter must be checked
and replaced if dirty or damaged.
- The deposit needs to be inserted with
spiral filter put into place. Then the whole
must be closed by screwing the lid shut.
Lid
Brush
Ref. 0786640
Filter Ref.0780840
Deposit
Spiral
Ref. 0780550