AP250
AL250
AL250
SF280
SF250
ALE250
AP250
AL250
AL250
SF280
SF250
ALE250
4
1.
Loosen the cartridge screw to release the cartridge. Place the a new one into the auto-feed iron.
Mark
Guide tube
Ref . 0002401 - Ø 0,9 - 1 mm (0.035 - 0.04 in)
Changing cartridge
For a safe cartridge change, unplug the tool or turn the station off before following these guidelines:
2.
Align the tip of the cartridge with the solder guide tube.
Important:
It is essential to insert the cartridge till the end for a good connection. Use the mark as
reference. Tighten the cartridge screw (1).
3.
You must leave
a gap of 8 to 10
mm
(0.31 - 0.40 in) between the tip and the end of the Guide tube.
4.
Loosen the guide screw. Adjust the guide tube and tighten the screw.
8-10 mm
(0.31 - 0.40 in)
2
1
4
3
