ENGLISH
USER MANUAL
JB SYSTEMS
®
7/7
PARTY SPOT
DMX Chart for the 8 channel DMX-Mode
The most advanced DMX-mode with extra automatic effect modes.
Channel:
Value:
Function:
1
000-255
Master dimmer (0-100%)
2
000-006
Strobe OFF
007-255
Strobe (Slow to Fast)
3
000-050
Manual Control
051-100
Color Chase
101-150
Color Fade
151-200
Color Pulse (each color fades in and fades out)
201-255
Sound Controlled
4
000-255
Effect speed control (channel 3 = 051-200)
5
000-255
Red (0-100%)
6
000-255
Green (0-100%)
7
000-255
Blue (0-100%)
8
000-255
White (0-100%)
MAINTENANCE
Make sure the area below the installation place is free from unwanted persons during servicing.
Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics.
Clean with a soft cloth using normal glass cleaning products.
Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
This device was designed to produce decorative effect lighting and is used in light show systems.
Mains Input:
110-240Vac, 50/60Hz
Power consumption:
60 Watt
Fuse:
250V 2A slow blow (20mm glass)
Power linking (IEC in / out):
max. total load = 10A
Sound Control:
Internal microphone
DMX connections:
XLR 3pin
DMX modes:
4, LC02, 6 and 8 DMX Channels
LED Source:
7x 4-in-1 LEDs (Red, Green, Blue, White)
Beam angle:
± 40°
Size:
190x190x140mm
Weight:
1 kg
All the information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.jb-systems.eu