ENGLISH
USER MANUAL
JB SYSTEMS
®
4/11
INTRUDER
4. DMX IN:
3p XLR Male connector receive DMX data from a console or use in Master/slave mode.
5. DMX OUT:
3p XLR Female connector to connect other projectors or use in Master/slave mode.
6. FUSE HOLDER
7. POWER IN:
Connect the mains input cable here.
8. POWER OUT:
used to daisy chain the power to several other fixtures. Always pay attention to the
maximum load while adding fixtures! Special combi cables (power + DMX XLR-cables) are available: see
our website!
SETUP MENU:
•
This is the list of all the functions in the machine.
•
To select any of these functions, press the MENU button and use the
▲/▼ buttons to browse the menu.
•
Select the desired function with the ENTER button.
•
Use
▲/▼ buttons to change the mode or value.
•
Once the required mode or value is selected, press the ENTER button to select.
Level 1
Level 2
Level 3
Remarks
DMX address
000-512
Fixture
DMX Mode
STD/HSI/EXT/EASY
Run Mode
DMX/Manual/Sound/Master
Pan Invert
OFF/ON
Tilt invert
OFF/ON
No Signal
BO/Freeze
Dim Curve
Linear/S-curve/Exp1,5/Exp2,0
Sensitivity
0--99
Manual
Pan
0-255
Pan fine
0-255
Tilt
0-255
tilt fine
0-255
…
Display
Display Flip
OFF / ON
Display Mode
60s / Show
Information
Time
Current time
Total time
Error
Pan
Tilt
Zoom
Temp
Fan
Temperature
Head temp
Software version
Panel
Factory
Password
000 - 255
Password = 122
Pan
000 - 255
Tilt
000 - 255
Zoom
000 - 255
Rotate
000 - 255
Red
000 - 255
Green
000 - 255
Blue
000 - 255
White
000 - 255
Reset
All reset
Off/Reset
Factory
Off/Reset