ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
7/11
CLUBWASH
•
Press the
[MENU]
button until
“
[itLt]
” is shown on the display.
•
Press the
[ENTER]
button, the display starts blinking.
•
Use
▼ and ▲ buttons to select “
no
” (normal) or “
YES
” (tilt inversion) mode.
•
Once the mode has been selected, press the
[ENTER]
button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the
[MENU]
button again.
White balance
It allows the user to fine tune the colors to achieve the perfect white
•
Press the
[MENU]
button until the display shows “
[bALA]
”.
•
Press the
[ENTER]
button, the display starts blinking.
•
If you want to change the default settings, press the
▼ and ▲ buttons to select “
RED
”, “
BLUE
” or
“
GREEN
”.
•
Press
[ENTER]
and modify the values to set a specific color temperature, confirm with
[ENTER]
.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the
[MENU]
button again.
Test
Used to check all functions of the unit.
•
Press the
[MENU]
button to show
“
[tESt]
” on the display.
•
Press the
[ENTER]
button, the display starts blinking.
•
The CLUBWASH will start its auto test program which will show the different colors (RED, GREEN, BLUE,
WHITE, AMBER and UV) and does a complete [PAN] and [TILT] movement.
To go back to the main menu press the
[MENU]
button shortly.
If you want to go back to normal running mode: press the
[MENU]
button for about 2 seconds.
Temp.
Used to show the temperature inside the unit
•
Press the
[MENU]
button until the display shows
“
[tEMP]
.”.
•
Press the
[ENTER]
button to show the internal temperature of the unit on the display.
•
To go back to the functions press the
[MENU]
button again.
If you want to go back to normal running mode: press the
[MENU]
button for about 2 seconds.
Fixture time
Used to show the number of working hours of the unit.
•
Press the
[MENU]
button until
“[FhrS]”
is blinking on the display.
•
Press the
[ENTER]
button to show the number of working hours in the display.
To go back to the functions press the
[MENU]
button.
Reset
Used to force a reset of the unit.
•
Press the
[MENU]
button until
“
[rESt]
” is blinking on the display.
•
Press the
[ENTER]
to reset all channels to their standard position.
•
To go back to the functions press the
[MENU]
button.
Please also check the chapter about the DMX-channel configuration of the unit to find out how you can force
a reset by DMX.
