ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
5/8
CAM-SPOT 50TW
DMX Addr
Used to set the desired DMX-address.
•
Press the [MENU] button or [UP]/[DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the DMX value can now be changed
•
Use UP/DOWN buttons to select the desired DMX512 address. The last occupied DMX-address is also
shown: this makes it easier to set the address of the next unit in the chain.
•
Once the correct address shows on the display, press the [ENTER] button to save it.
DMX Chan
Used to set the desired channel mode.
•
Press the [MENU] button or [UP]/[DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use [UP]/[DOWN] buttons to select the desired mode:
•
[2.1CH]:
CW + WW.
•
[2.2CH]:
CCT.
•
[3CH]:
CW + WW+ Dimmer.
•
[4CH]:
CW + WW+ Strobe.
•
Once the correct option shows on the display, press the [ENTER] button to save it.
Mas/Slav
Used to set the projector as slave in a master/slave setup.
•
Press the [MENU] button or [UP]/[DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.
Strobe
Used to set the Strobe while used in manual mode.
•
Press the [MENU] button or [UP]/[DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use [UP]/[DOWN] buttons to select the desired level for the master dimmer. (please note that the last
selected static color will be used to set the value)
•
Once you have the desired level, press the [ENTER] button to save it.
DMX Fail
Used to set the desired DMX loss setting
•
Press the [MENU] button or [UP]/[DOWN] buttons until the desired function is showing on the display.
•
[Hold]
Projector keeps the last valid output before DMX loss
•
[Manual]
Projector goes to manual mode when DMX is lost
•
[Black-Out]
Projector output turns dark when DMX is lost
•
Once the correct option shows on the display, press the [ENTER] button to save it.
Note: as soon as the input detects a DMX-signal, Hold, Manual or Black-Out mode will be cancelled.
Temp
Used to monitor the internal temperature of the fixture.
•
Press the [MENU] button or [UP]/[DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: Display the internal temperature.
DimMode
Used to select the reaction time of the projector.
•
Press the [MENU] button or UP/DOWN buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use UP/DOWN buttons to select the desired mode:
•
[Off]
The projector follows the instructions instantly, no delay.
•
[Dim1..4]
The projector imitates the behavior of a halogen lamp (slower reaction time).
•
Once the correct option shows on the display, press the [ENTER] button to save it.
Factory
This is your emergency exit if you really messed up the settings: just return to factory settings.
Also 2 user settings can be saved/loaded.
•
Press the [MENU] button or [UP]/[DOWN] buttons until the desired function is showing on the display.
•
Press the ENTER button: the values can be changed
