JB-Lighting Varyscan 4 1200HMI, User Manual

Page: 41 / 48

41
Varyscan
®
4 1200 HMI
dimmer shutter closed --> blackout (BO) DMX 0
dimmer: you can perceive some light DMX 19
dimmer DMX 20 - 127
dimmer completely open DMX 128 - 137
shutter immediatelly closed DMX 138 - 139
shutter sequence 1 flash/sec upto 10 flashes/sec DMX 140 - 243
shutter open DMX 244 - 255
channel 6 = iris and gobo rotation
iris closed / gobo first position DMX 0
iris open / gobo first position DMX - 64
second gobo position DMX 65
third gobo position DMX 66
..........
locked into position 360° DMX 191
locked into position 540° DMX 191
rotation left highest speed DMX 192
rotation left lowest speed DMX 222
rotation stop DMX 223 - 224
rotation right slow DMX 225
rotation right fast DMX 255
Occupation DMX-In / DMX-Out
DMX-IN DMX-OUT
Pin1: ground black Pin1: ground black
Pin2: DMX- beige Pin2: DMX- beige
Pin3: DMX+ red Pin3: DMX+ red
Pin4: free Pin4: free
Pin5: + 5V green Pin5: free
Technical data
Measurements: hight 100cm
width 34cm
depth 24cm
Weight: 36 kg
Power consumption: ca. 1725W
Mains Voltage: 230V 50Hz 7,5A
Bulb : Osram 1200 HMI
Fuse: 16 ampere inert
Change of Eprom/ Software Update
To change the Eprom proceed as follows:
Remove the cover sheet for the electronic board below the mirror by taking out the 4 screws (see sketch page 36). By
comparing the electronic board with the plan of electronic parts you can see the Eprom at the right side (IC U2). Carefully
lift out the used Eprom from the holder and change it for a new one.