Installation Guide
12
Unitronics
Notes:
6.
The JZ20 built-in USB port may be used for programming. Add-on Modules are available
by separate order for communication and cloning. Note that the USB port and an Add-on
module cannot be physically connected at the same time.
7.
Add-on module JZ-PRG, with 6-wires communication cable
(supplied in PRG kit
– see the JZ-PRG Installation Guide) can be used:
- for programming
- to connect a modem
8.
Add-on module JZ-RS4 (RS232/485), with a standard 4-wire communication
cable can be used:
- for programming
- to communicate with other devices (including modems/GSM)
- for RS485 networking.
9.
Add-on module MJ20-ET1 enables communication over 100 Mbit/s TCP/IP network:
-
Programming/data exchange with Unitronics software;
-
Data exchange via MODBUS TCP as Master or Slave.
Miscellaneous
Clock (RTC)
Real-time clock functions (date and time).
Environmental
Operating temperature
0
to 50
C (32
to 122
F)
Storage temperature
-20
to 60
C (-4
to 140
F)
Relative humidity (RH)
10% to 95% (non-condensing)
Mounting method
Panel mounted (IP65/NEMA4X)
DIN-rail mounted (IP20/NEMA1)
Dimensions
Size
147.5X117X46.6mm
"
5.807
)
X
"
4.606 X 1.835"). See Note 10
Weight
300 g (10.6 oz)
Notes:
10.
For exact dimensions, refer to Page 2.
Mount
i
ng
Panel mounting
Insert into cut-out: 117 x 89mm (WxH)
4.606”x 3.504”
DIN-rail mounting
Snap unit onto the DIN rail
The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole
discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or
temporarily withdraw any of the forgoing from the market.
All information in this document is provided "as is" without warranty of any kind, either expressed or implied, including but not limited to any implied warranties of
merchantability, fitness for a particular purpose, or non-infringement. Unitronics assumes no responsibility for errors or omissions in the information presented in
this document. In no event shall Unitronics be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever arising
out of or in connection with the use or performance of this information.
The tradenames, trademarks, logos and service marks presented in this document, including their design, are the property of Unitronics (1989) (R"G) Ltd. or other
third parties and you are not permitted to use them without the prior written consent of Unitronics or such third party as may own them
UG_JZ20-T1X_T20HS.pdf
09/22
