8
Press to enter and exit
Trimming Mode
Indicator Light
FLYING
TRIM ADJUSTMENT & COUNTERING DRIFT
Even after a drone is calibrated, it may still drift while airborne. To counter this effect, you can
adjust the trim for better control. However, adjusting the trim may not entirely eliminate
drifting. Air currents and other factors can still affect the drone’s handling.
Making Trim Adjustments:
Press the Trim button to enter Trimming Mode, indicated by a blinking indicator light on the
remote. While in Trimming Mode, move the Right Control Stick ONCE in the opposite
direction of the drift.
For example, if the drone is drifting forward, enter Trimming Mode and pull backward on the
stick to correct. If the drone is drifting right, pull left. The remote will chime once for each
adjustment. It may take multiple adjustments to set the trim to your liking.
When you are finished, press the Trim button to exit Trimming Mode. You can also wait 3
seconds, and Trimming Mode will finish automatically.
To avoid potential damage, adjust the trim while attempting a stable hover, and adjust one
trim setting at a time to avoid confusion.
Note: While in Trimming Mode, the Right Control Stick only makes trim adjustments
and does not control the direction of the craft. You must exit Trimming Mode to resume
normal flight controls. The Left Control Stick is not affected by Trimming Mode.
Move Right Control Stick to
adjust pitch and roll trim.
Remote will chime once for each
adjustment.
