Step 1
Step 2
Step 3
Step 4
Then remove the two screws under
the rotor to release the cap holding
the rotors.
Replace the old rotors by removing
first the rotor screw and pull rotor up.
Insert the new rotors making sure to
use the correct marked A or B and
tight the two screws back. Do not
over tighten.
Secure the rotor back by tightening
the retaining screw firmly, but also,
do not over tighten.
10
REMINDER:
Pilots are responsible for any damage caused by improper use.
Cleaning Instruction:
PARTS AND REPAIR
The drone comes with replacement rotors if the originals are broken or badly damaged, use
the included screwdriver to remove the rotor retaining screw that holds the rotor to the motor
shaft. Once the retaining screw is out, pull upwards on the rotor to remove it from the motor
shaft. Installation of the new rotor is the reverse of the removal process. Be sure to tighten
the rotor retaining screw firmly, but do not overtighten.
It is extremely important to use the correct rotor (A or B) for replacement. Using the incorrect
rotor will make the drone impossible to control. The marking can be found on the rotor near
the shaft.
ROTOR REPLACEMENT
To clean, wipe excess dirt from toy. Wipe toy clean with damp cloth. Wipe dry.
DO NOT IMMERSE IN WATER and DO NOT CLEAN VEHICLE WITH ANY CHEMICALS.
Let the toy completely dry before playing.
