8
Loading A Disc:
1. Set the
Function Selector
to
CD
position.
2. The
LCD
will display 2 dashes (--) and indicate
no
,
(provided there is not disc already loaded)
3. Open the
CD Door
gently pressing down the
OPEN/CLOSE
section
of the
CD Door
.
4. Insert a disc into the
CD Compartment
ensuring the label is facing upwards.
5. Close the
CD Door
by gently pushing down.
6. The
LCD
will show the total number of tracks on that particular disc.
CAUTION : Never touch the laser lens inside the CD Compartment.
If this gets dirty, clean it with a CD disc cleaner.
Playing A Disc:
Normal Playback
1. Set the
Function Selector
to
CD
position and wait 5-10 seconds.
If a disk is already in the
CD Compartment
, the
LCD
will show the total
number of tracks on its display.
2. Press the
Play/Pause
() button to start play. The rest track number ()
01
will appear in the
LCD
and the disc will start playing with 5-10 seconds.
3. Use the
Volume Control
button to adjust the volume to your desired
volume level.
4. To stop the disc temporarily, press the
Play/Pause
( ) button once.
Although the disc will continue spinning,it will stop playing and ( )
will flash in the
LCD
.
5. To resume play, press the
Play/Pause
( ) button again.
6. To stop playing, press the
Stop
button.
7. To turn off the CD, switch the
Function Speaker
to
OFF
or
RADIO
position.
NOTE :
Never press the
CD Door
down during play, this may cause
malfunction or damage the disc. Always stop the CD player by using
the
Stop
button and wait for a few seconds to ensure the disc has stopper
spinning, before removing the disc from the
CD Compartment
.
If you move or knock against the unit during play, the music will stop for
a second or two before resuming play. This is normal for portable players.
